View TM060RDH03_7764728.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 1 of 18 coversheet model no. : TM060RDH03 issued date: 2010-5-7 version : ver 1.1 preliminary specification final product specification customer : approved by notes shanghai tianma confirmed : prepared by checked by approved by this technical specification is subjected to change without notice
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 2 of 18 table of contents coversheet..................................................................................................................... ................... 1 record of revision............................................................................................................. ............... 3 1.general specifications ....................................................................................................... ............ 4 2.input/output terminals ....................................................................................................... ............ 5 3.absolute maximum ratings ..................................................................................................... ...... 6 4 . electrical characteristics..................................................................................................... ........... 6 5.interface timing ............................................................................................................. ................ 6 5.1 . data input timing .............................................................................................................. .... 6 5.2 . enter and exit standby mode sequence ............................................................................. 6 5.3 . power on/off sequence ........................................................................................................ 6 6. optical characteristics........................................................................................................ ........... 6 7. environmental / reliability test............................................................................................... ....... 6 8. mechanical drawing ............................................................................................................. ......... 6 9. packing drawing................................................................................................................ ............ 6 10. precautions for use of lcd modules........................................................................................... 6
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 3 of 18 record of revision rev issued date description editor 1.0 2010-3-9 preliminary release. haitao chen 1.1 2010-5-7 update power consumption haitao chen
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 4 of 18 1. general specifications feature spec size 6.0 inch resolution 800(rgb) x 480 interface rgb 24 bits with tcon color depth 16m technology type a-si pixel pitch (mm) 0.1665x0.1538 pixel configuration r.g.b. vertical stripe display mode tm with normally white surface treatment(up polarizer) anti glare surface treatment(tsp) anti glare viewing direction 12 o?clock display spec. gray scale inversion direction 6 o?clock lcm (w x h x d) (mm) 145.50x87.80x3.40 active area(mm) 133.20x73.80 with /without tsp without tsp weight (g) tbd mechanical characteristics led numbers 21 leds note 1: viewing direction for best image quality is different from tft definition, there is a 180 degree shift. note 2: requirements on environmental protection: rohs note 3: lcm weight tolerance: 5%
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 5 of 18 2. input/output terminals 2.1 tft lcd panel no symbol i/o description comment 1 vled- p led light cathode 2 vled+ p led light anode 3 gnd p ground 4 vdd p power supply 3.3v 5 r0 i red data 6 r1 i red data 7 r2 i red data 8 r3 i red data 9 r4 i red data 10 r5 i red data 11 r6 i red data 12 r7 i red data 13 g0 i green data 14 g1 i green data 15 g2 i green data 16 g3 i green data 17 g4 i green data 18 g5 i green data 19 g6 i green data 20 g7 i green data 21 b0 i blue data 22 b1 i blue data 23 b2 i blue data 24 b3 i blue data 25 b4 i blue data 26 b5 i blue data 27 b6 i blue data 28 b7 i blue data 29 gnd i ground 30 pclk i clock signal 31 disp i display on/off 32 hsync i horizontal synchronize signal 33 vsync i vertical synchronize signal 34 de i enable signal 35 nc - no use 36 gnd p ground 37 x1 o touch panel right side 38 y1 o touch panel bottom side 39 x2 o touch panel left side 40 y2 o touch panel top side note: i/o definition: i----input o----output p----power/ground
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 6 of 18 3 absolute maximum ratings 3.1 driving tft lcd panel ta = 25 item symbol min max unit remark supply voltage vdd -0.5 5.0 v back light forward current i led 25 ma for each led operating temperature t opr -20 70 storage temperature t stg -30 80
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 7 of 18 4 electrical characteristics 4.1 driving tft lcd panel gnd=0v, ta=25 item symbol min typ max unit remark logic supply voltage vdd 2.7 3.3 3.6 v low level v il 0 - 0.3xvdd v input signal voltage high level v ih 0.7xvdd - vdd v r0~r7,g0~g7,b0~b7, hsync,vsync,pclk,de,disp low level v ol - - 0.3xvdd v output signal voltage high level v oh 0.7xvdd - vdd v x1,x2,y1,y2 black mode (60hz) - 900 - mw standby mode - 517 - uw power consumption back light 1344 mw 4.2 driving backlight ta = 2 5 item symbol min typ max unit remark forward current i f -- 60 75 ma forward voltage v f -- 22.4 -- v backlight power consumption w bl -- 1344 -- mw operating life time -- 10,000 20,000 hrs 21 leds (7 led serial, 3 led parallel) note 1: the figure below shows the connection of backlight led. led+ led- note 2: each led : i f =20 ma, v f =22.4v note 3: i f is defined for one channel led.optical performance should be evaluated at ta=25 only. if led is driven by high current, high ambient tem perature & humidity condition. the life time of led will be reduced.operating life means brightness goes down to 50% initial brightness. typical operating life time is estimated data.
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 8 of 18 4.3 block diagram
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 9 of 18 5. interface timing 5.1 data input timing parameter symbol value unit horizontal display area thd 800 pclk min. typ. max. pclk frequency @ frame rate =60hz fclk - 30 40 mhz 1 horizontal line th 928 hsync pulse width thpw 1 48 - hsync blanking thb - 88 - hsync front porch thfp - 40 - pclk table 5.1 horizontal input timing value parameter symbol min typ max unit vertical display area tvd 480 h vsync period time tv 525 vsync pulse width tvpw - 3 - h vsync blanking(tvb) tvb - 32 - h vsync front porch (tvfp) tvfp - 13 - h table 5.2 vertical input timing figure 5.1 vertical input timing
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 10 of 18 figure 5.2 horizontal input timing 5.2 enter and exit standby mode sequence
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 11 of 18 5.3 power on/off sequence figure 6.1 power on sequence figure 6.2 power off sequence
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 12 of 18 6. optical characteristics ta=25 item symbol condition min typ max unit remark t 50 60 -- b 60 70 -- l 60 70 -- view angles r cr R 10 60 70 -- degree note 2 contrast ratio cr = 0 400 500 -- note1 note3 t on response time t off 25 -- 20 30 ms note1 note4 x 0.265 0.315 0.365 white y 0.290 0.340 0.390 x 0.430 0.580 0.530 red y 0.300 0.350 0.400 x 0.295 0.345 0.395 green y 0.525 0.575 0.625 x 0.095 0.145 0.195 chromaticity blue y backlight is on 0.065 0.115 0.165 note5 note1 uniformity u 75 80 -- % note1 note6 ntsc -- 50 -- % note 5 luminance l 250 350 -- cd/m 2 note1 note7 test conditions: 1. i f = 20ma, v f =22.4v,the ambient temperature is 25 . 2. the test systems refer to note 1 and note 2.
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 13 of 18 note 1: definition of optical measurement system. the optical characteristics should be measured in dark room. after 5 minutes operation, the optical properties are measured at the center point of the lcd screen. all input terminals lcd panel must be ground when measuring the center area of the panel. note 2: definition of viewing angle range and measurement system. viewing angle is measured at the center point of the lcd by conoscope(ergo-80) note 3: definition of contrast ratio ?white state ?: the state is that the lcd should drive by vwhite. ?black state?: the state is that the lcd should drive by vblack. vwhite: to be determined vblack: to be determined. note 4: definition of response time the response time is defined as the lcd optical switching time interval between ?white? state and item photo detector field contrast ratio luminance chromaticity lum uniformity sr-3a 1 response time bm-7a 2 500mm photo detector field lcd panel tft-lcd module the center of the screen
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 14 of 18 ?black? state. rise time (t on ) is the time between photo detector output intensity changed from 90% to 10%. and fall time (t off ) is the time between photo detector output intensity changed from 10% to 90%. note 5: definition of color chromaticity (cie1931) color coordinates measured at center point of lcd. note 6: definition of luminance uniformity active area is divided into 9 measuring areas (refer fig. 2). every measuring point is placed at the center of each measuring area. luminance uniformity (u) = lmin/ lmax l-------active area length w----- active area width lmax: the measured maximum luminance of all measurement position. lmin: the measured minimum luminance of all measurement position. note 7: definition of luminance: measure the luminance of white state at center point.
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 15 of 18 7. environmental / reliability test no test item condition remarks 1 high temperature operation ts = +70 , 240 hours iec60068-2-2 gb2423.2-89 2 low temperature operation ta = -20 , 240 hours iec60068-2-1 gb2423.1-89 3 high temperature storage ta = +80 , 240 h ours iec60068-2-2 gb2423.2-89 4 low temperature storage ta = -30 , 240 hours iec60068-2-1 gb2423.1-89 5 storage at high temperature and humidity ta = +60 , 90% rh max,240hours iec60068-2-3 gb/t2423.3-2006 6 thermal shock (non-operation) -30 30 min~+ 80 30 min, change time:5min, 100 cycle iec60068-2-14 gb2423.22-87 7 esd c=150pf,r=330 ? ,5point/panel air:8kv,5times; contact:4kv,5times (environment:15 ~35 , 30%~60%.86kpa~106kpa) iec61000-4-2 gb/t2423.5-1995 8 vibration test frequency range:10~55hz stroke:1.5mm sweep:10hz~55hz~10hz 2 hours for each direction of x.y.z. (6 hours for total) iec60068-2-6 gb/t2423.10-1995 9 mechanical shock (non op) half sine wave 100g 6ms, x,y,z 3times for each direction iec60068-2-27 gb/t2423.5-1995 10 package drop test height:60cm, 1corner,3edges,6surfaces iec60068-2-32 gb/t2423.8-1995 note1: ts is the temperature of panel?s surface. note2: ta is the ambient temperature of samples.
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 16 of 18 8. mechanical drawing
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 17 of 18 9. packing drawing no item model(material) dimensions (mm) unit weigt (kg) quantity remark 1 lcm TM060RDH03 145.50x87.80x4.50 tbd 50 2 partition-1 corrugated paper 513x333x215 1.388 1 anti-static 3 anti-static bag pe 173x150x0.05 0.001 50 anti-static 4 dust-proof bag pe 700x530 0.06 1 5 partition_2 corrugated paper 505x332x4.0 0.098 2 6 corrugated paper corrugated paper 513x100x30 0.048 4 7 carton corrugated paper 530x350x250 1.12 1 8 total weight (kg) tbd b xxxxxxxxxxxxx xxxxxxxxxx xxxxxxxxxxxxx xxxxxxxxxx
shanghai tianma micro-electronics TM060RDH03 v1.1 the information contained herein is the exclusive property of shanghai tianma micro-electronics corporation, and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of shanghai tianma micro-electronics corporation. page 18 of 18 10. precautions for use of lcd modules 10.1 handling precautions 10.1.1 the display panel is made of glass. do not subject it to a mechanical shock by dropping it from a high place, etc. 10.1.2 if the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water. 10.1.3 do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. 10.1.4 the polarizer covering the display surface of the lcd module is soft and easily scratched. handle this polarizer carefully. 10.1.5 if the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. if still not completely clear, moisten cloth with one of the following solvents: isopropyl alcohol ethyl alcohol solvents other than those mentioned above may damage the polarizer. especially, do not use the following: water ketone aromatic solvents 10.1.6 do not attempt to disassemble the lcd module. 10.1.7 if the logic circuit power is off, do not apply the input signals. 10.1.8 to prevent destruction of the elements by static electricity, be careful to maintain an optimum work environment. 10.1.8.1 be sure to ground the body when handling the lcd modules. 10.1.8.2 tools required for assembly, such as soldering irons, must be properly ground. 10.1.8.3 to reduce the amount of static electricity generated, do not conduct assembly and other work under dry conditions. 10.1.8.4 the lcd module is coated with a film to protect the display surface. be care when peeling off this protective film since static electricity may be generated. 10.2 storage precautions 10.2.1 when storing the lcd modules, avoid exposure to direct sunlight or to the light of fluorescent lamps. 10.2.2 the lcd modules should be stored under the storage temperature range. if the lcd modules will be stored for a long time, the recommend condition is: temperature : 0 40 relatively humidity: 80% 10.2.3 the lcd modules should be stored in the room without acid, alkali and harmful gas. 10.3 transportation precautions 10.3.1 the lcd modules should be no falling and violent shocking during transportation, and also should avoid excessive pr ess, water, damp and sunshine.

▲Up To Search▲

Price & Availability of TM060RDH03

	To Download TM060RDH03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .